| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Zpoxy over stained neck - issues? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=9493 |
Page 1 of 1 |
| Author: | Mark Tripp [ Sat Nov 25, 2006 3:56 am ] |
| Post subject: | |
My #4 is being built for a friend - a rosewood and and carpathian dread. We want to stain the neck. I've been pore filling with Z-poxy and am wondering if there are any issues with laying epoxy on over analine dye. What should I be aware of when doing this? OR, should I take another approach? -Mark |
|
| Author: | burbank [ Sat Nov 25, 2006 5:22 am ] |
| Post subject: | |
Z-poxy over water-based or alcohol-based analine dye should be fine, as long as the solvent in the dye has evaporated completely after the staining step. Not advisable over oil-based. Best practice is to test for yourself. |
|
| Author: | Mark Tripp [ Sat Nov 25, 2006 11:19 am ] |
| Post subject: | |
Thanks Pat... *bump* -Mark |
|
| Author: | Mark Tripp [ Sat Nov 25, 2006 3:24 pm ] |
| Post subject: | |
Cool - Thanks Hesh! I have been meaning to get some of these stains. All I have right now is analine powder. Did some tests today with both water and alcohol, and both seemed to work fine... -Mark |
|
| Author: | Serge Poirier [ Sat Nov 25, 2006 4:46 pm ] |
| Post subject: | |
Good luck Mark , please report on how it goes, i might try that out too in the future! Thanks Serge |
|
| Author: | Michael Dale Payne [ Mon Nov 27, 2006 1:09 am ] |
| Post subject: | |
nevermind |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|